berhubung saya baru kembali ke ubuntu, mohon bantuan untuk panduan instalasinya :) dengan wvdial atau ppp? dan bagaimana pada saat login kembali kita tidak perlu mengkonfigurasi ulang .. Terimakasih!

-----------------------------------------------------
wira@wira-desktop:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 19d2:fff1 ONDA Communication S.p.A.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

wira@wira-desktop:~$ wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: QUALCOMM INCORPORATED
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB4<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
/etc/wvdial.conf<Warn>: Can't write '/etc/wvdial.conf.tmp2174': Permission denied
/etc/wvdial.conf<Warn>: Can't write '/etc/wvdial.conf' ('/etc/wvdial.conf'): Bad file descriptor
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

Aplikasi terinstall:

libwvstreams4.6-base_4.6-2_i386.deb
libwvstreams4.6-extras_4.6-2_i386.deb
libuniconf4.6_4.6-2_i386.deb
wvdial_1.60.1+nmu2ubuntu1_i386.deb

my wvdial.conf

[Dialer Zte]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
+FCLASS=0
Modem Type = Analog Modem
Phone = #777
Username= 9313750406
Password = 9313750406
ISDN =0
SetVolume = 0
FlowControl = Hardware (CRTSCTS)
Modem =
/dev/ttyUSB0
Dial Command = ATDT
Baud = 460800
Stupid
Mode = 1

but not sure if yours is the same ZTE...

goodluck..

try this

http://skyisgrey.org/

:) caranya begini:
gnome-terminal > gksu nautilus
file system > /etc > wvdial.conf

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = #777
ISDN = 0
Password = xxxxxxxxxx
New PPPD = yes
Username = xxxxxxxxxx
Modem = /dev/ttyUSB0
Baud = 460800

sudo wvdial

akhirnya tinggal paket GUI phone/sms yg blm bisa nih ..

ZTE AC2726 sudah bisa ol di karmic. eh, tp kok disco tiap 1 jam yah? pake wvdial nih. ada yang ngalamin juga?

ya sesekali dc, tapi ngga selalu tiap 1 jam :)
di windows pun kadang 0 Kbps tuh ..

--
GUI untuk ZTE modem seperti http://skyisgrey.org/blog/smart-zte-ac2726-ubuntu-linux.html, di karmic ngga berfungsi ya?

kaya gini nih bro... :(

================================
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Wed Nov 4 21:02:27 2009
--> Pid of pppd: 2041
--> Using interface ppp0
--> pppd: h[7f]
--> pppd: h[7f]
--> pppd: h[7f]
--> pppd: h[7f]
--> pppd: h[7f]
--> local IP address 10.11.37.249
--> pppd: h[7f]
--> remote IP address 10.17.4.12
--> pppd: h[7f]
--> primary DNS address 10.17.3.252
--> pppd: h[7f]
--> secondary DNS address 10.17.3.254
--> pppd: h[7f]
--> pppd: h[7f]
--> Connect time 50.6 minutes.
--> pppd: h[7f]
--> pppd: h[7f]
--> pppd: h[7f]
--> pppd: h[7f]
--> Disconnecting at Wed Nov 4 21:53:06 2009
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
===================================

selalu tiap sejam..

GUI ZTE yang ntu cuman buat i386 yak? di sayah pake amd64 :D

The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
saya pakai zte mf 620 danlinux ubuntu
tlng bantuannya karena sangat meendesak